Vantage LED Puddle Lights for Old Glory US Flag

Description

Personalize your vehicle with Vantage LED Puddle Lights, projecting your selected design onto the ground. Choose from the available product types and configurations shown on this page.

Features

• Film (Film Only): Replacement projection film available in 10mm or 13mm for compatible light assemblies.
• Retrofit: Wired light assemblies using replaceable 13mm film. Requires drilling the door panel and wiring to the vehicle.
• Wireless: Battery-powered light assemblies with built-in motion sensors and replaceable 13mm projection films.
• Door (Where Available): Replaces the factory door-panel courtesy light. Uses replaceable 10mm film and is vehicle-specific.
• Mirror (Where Available): Replaces the factory exterior mirror puddle light. Uses a sealed enclosure with non-replaceable 10mm film and is vehicle-specific.
• Design & Color Options: LED color availability varies by design. Full-color designs use a white LED to display the artwork as intended.

What’s Included

All configurations are sold as a pair intended for two doors.

• Film: (1 Pair) of projection films. Select 10mm or 13mm.
• Retrofit: (1 Pair) of light assemblies and (1) drill bit.
• Wireless: (1 Pair) of wireless light assemblies. Requires (3) AAA batteries per light (not included).
• Door (Where Available): (1 Pair) of factory-replacement door courtesy lights.
• Mirror (Where Available): (1 Pair) of factory-replacement mirror puddle lights.

Important Notes

• Film Life: Projection films use printed ink that may fade over time due to heat from the LED. Extended operating time may accelerate fading.
• Operating Time: Avoid leaving the lights on for extended periods. Close the vehicle door promptly after testing or viewing the projection. Some vehicles automatically shut off their lights after 10–15 minutes, but this feature varies by vehicle. Do not rely on an automatic shutoff.
• Projection Height: For Retrofit and Wireless configurations, a higher mounting position generally produces a wider projection.
• Test Before Installation: Test all lights for proper operation before installation to identify potential issues.
• Installation Recommendation: Professional installation is recommended for Retrofit configurations, particularly if you are unfamiliar with drilling or automotive wiring.